Product ID:97675 SILICONE RUBBER SEALANT
MSDS Date:09/29/1995
FSC:8030
NIIN:00F052188
MSDS Number: CDCRM

MACKLANBURG-DUNCAN

4041 NORTH SANTA FE
OKLAHOMA CITY, OK 73118-5000
US

Emergency Phone: 405-528-4411

Info Phone: 405-528-4411

Cage: 82464

MACKLANBURG-DUNCAN

OKLAHOMA CITY, OK 73118-0188 US

Telephone: 800-654-8454 / 405-528-4411

Cage: 82464

ETHYLTRIACETOXYSILANE *96-3*

CAS: 17689-77-9

Fraction By Weight: 2%

METHYLTRIACETOXYSILANE, ALKYL TRIACETOXY SILANE

CAS: 4253-34-3

RTECS: VV4500000

Fraction By Weight: 2%

AMORPHOUS SILICA GEL, SILICON DIOXIDE *96-3*

CAS: 7631-86-9

Fraction By Weight: 11%

DIMETHYL SILOXANE),

CAS: 63148-62-9

RTECS: JT6484500

SILOXANES & SILICONES DI-ME HYDROXY-TERMINATED *96-3*

CAS: 70131-67-8

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:UNCURED PRODUCT MAY CAUSE SKIN
IRRITATION. INHALATION: MAY IRRITATE RESPIRATORY TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHE, BREATHLESSNESS

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Flash Point:>400F (SEE SUPP)
Lower Limits:5.4
Upper Limits:16
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE. WEAR SELF CONTAINED
BREATHING APPARATUS IN POSITIVE PRESSURE MODE & FULL PROTECTIVE
GEAR.
Unusual Fire/Explosion Hazard:IRRITATING/TOXIC GASES & AEROSOLS MAY BE
PRODUCED DURING BURNING. ACETIC ACID IS FORMED DURING CURING.
FLAMES-ACETIC ACID MAY IGNITE.

Spill Release Procedures:SCRAPE INTO CONTAINERS & DISPOSE OF.

Handling and Storage Precautions:DON'T STORE NEAR HEAT SOURCES,
SPARKS/FLAME. STORE BETWEEN 40 & 120F. KEEP AWAY FROM CHILDREN. USE
ONLY IN AREAS OF VENTILATION.
Other Precautions:DON'T INGEST. AVOID BREATHING VAPORS. AVOID PROLONGED
SKIN CONTACT.

Respiratory Protection:WEAR NIOSH APPROVED RESPIRATOR IF TLV OF ACETIC
ACID (10 PPM, 25 MG/M) IS EXCEEDED.
Ventilation:REQUIRED
Protective Gloves:CLOTH
Eye Protection:NORMAL PRECAUTION
Work Hygienic Practices:WASH SKIN & HANDS AFTER USE.
Supplemental Safety and Health
FLASH POINT INFORMATION: >400F FOR UNCURED CAULK. CURED PRODUCT DOES
NOT FLASH. UEL: ACETIC ACID BY-PRODUCT.

Melt/Freeze Pt:M.P/F.P Text:500F
Vapor Pres:NONE
Spec Gravity:1.1
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR/PIGMENTED SEMI-SOLID W/VINEGAR ODOR

Stability Indicator/Materials to Avoid:YES
STRONG ALKALI
Stability Condition to Avoid:HEAT, SPARKS, FLAMES
Hazardous Decomposition Products:CO2, CO, SILICON DIOXIDE, ACETIC ACID

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.